Frigidaire Refrigerator Error Code H1. Try cleaning the coils under the refrigerator. The thermistor monitors the refrigerator temperature and sends the temperature reading to the control board.
The same applies when the unit is switched on after it has been off for a long period. Try cleaning the coils under the refrigerator. You can push the temperature setting and it should go off, but it will come back as long as the tempature is too high.
The fridge was beeping with an error display of h1 for both the fridge and the freezer compartments. You can push the temperature setting and it should go off, but it will come back as long as the tempature is too high. Unplug the refrigerator and check the evaporator fan wire harness connection in the freezer.
Does this mean the problem could be the thermostat? The thermistor monitors the refrigerator temperature and sends the temperature reading to the control board. A google search said i may need to unplug to reset.
Lisa for model number ffhs2622msj. If correct, replace the thermistor. What does h1 mean on a frigidaire fridge?
The “h1” fault code indicates that the temperature in the refrigerator and freezer is higher than it should be. If the dial is numbered 1 to 5 set it on 3, if the dial is numbered 1 to 9, then set at 4. With everything being off and unplugging and plugging back up corrects the issue then this would most likely be a control board issue.
A frigidaire refrigerator beeping h1 means that your refrigerator part of the fridge has exceeded the threshold temperature. This indicates that either or both the freezer or fresh food sections are warmer than they should be. Check wiring between a thermistor and board.