Nissan Sentra Swirl Control Valve. When the ecm sends an on (ground) signal, the solenoid valve is bypassed to apply intake manifold vacuum to the swirl control valve actuator. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type.
P1130 Swirl Control Valve Control Solenoid Valve from maxima.org
The swirl control valve control solenoid valve responds to signals from the ecm. The swirl control valves (there are 6 of them) improve performance at low rpms. The sensor is connected to the front end of the valve shaft of the swirl.
And Are Backed By The Manufacturer's 12 Month, 12,000 Mile Warranty.
The actuator is at the end of the adapter. The cost to diagnose the p1138 2004 nissan sentra code is 1.0 hour of labor. 2012 sentra 2.0l cvt special 2012 g37 sedan 7a/t location:
Code P1138 Swirl Control Valve.
This operation closes the swirl control valve. I recently brought my 2004 nissan sentra to my mechanic shop for a a/c check. It had a leak from the low pressure hose and it was replaced.
P1138 Nissan Code Information For Specific Nissan Models.
The swirl control valves (there are 6 of them) improve performance at low rpms. 37000 i know that the swril control valve is and also that normally indicates swirl valve malfunctio. I got a code p1138 on my sentra 1.8s automatic transmition year 2005 vin:
Picture 2 Shows The Ground Location.
The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. The swirl valve is mounted in the intake manifold adapter. A whole ordeal with the swirl control valve on a 2000 sentra 1.8l.
Get The P1138 Nissan Code Diagnosed By A Professional:
The cost to diagnose the p1130 nissan code is 1.0 hour of labor. After checking it out again i see now the a/c only goes. Most auto repairs shops charge between $75 and $150 per hour.
